sales@oppspumpscn.com 0086-18950413320
Congratulation! new type of API 610 OH2 series are successfully installed in Indonesia, etc
DIN 24255 End Suction Pumps
Design:
Horizontal, single stage, and End suction centrifugal water pump with volute casing and back pull-out facility. 
Pump and Motor are separate components and connected to each other via flexible coupling. 
Maintenance is easy, the impeller, shaft and other rotating parts can be removalbe with no need to disconnect the suction and delivery pipes. Only four types of shaft and five types of bearing housing need to be used for all the models.So the broken parts can be easy to be interchanged. Spacer coupling is used to avoid the movement of driver or pump casing when the pump is on maintenance. 
Pumped Liguid: 
Thin, clean, non-aggressive and non-explosive liguids. 
Liguids should be free from large solid particles and fibres. 
Shaft Seal: 
1. Gland Packing; lantern Ring is used for water sealing and lubrication of packing. 
2. Mechnical Seal: Standard: Alloy-Alloy/Viton, other type can be choosed by the buyer. .  
Flange:  
DIN2332 PN10RF, Optional ANSI B16.5 Class 300lb. 

Technical Data:                                      Application:    1. City Water Supply 
Flow: 2-1100m3/h                                                      2. Irrigation 
Head: 2-150m                                                            3. Fire Fighting 
Speed: 1450rpm/2900rpm (50Hz)                                 4. Air conditioning 
      1750rpm/3500rpm (60Hz)                                      5. Fresh water on the ship 
Temperature: -10℃--150℃                                           6. Sanitary and cleaning installation
Operating Pressure: 10Bar, Optional 16Bar

DIN 24255 End Suction Pumps
Description:
We can design the bearing housing based your drawing 
Drawing:
Performance Curve:
Copyrights © 2018 www.oppspumpscn.com